New Products
Find LED Lighting PCBA, PC Board Assembly , Circuit Board Assembly on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.
Model No.: MK0704L0601
MOKO supply
1.with one stop EMS service from PCB,Components,PCBA,and PCBA Test,as a new PCBA projects,MOKO have this advantage.
2.will provide 5pcs samples for your test before the normal production.After your confirmation,we will start mass production
3.We can finish an EMS project as fast as 15days
PCB Assembly Capabilities
Quantity | Prototype&Low Volume PCB Assembly,from 1 Board to 250,is for specialty,but we can handle orders up to 1000 |
Type of Assembly | SMT and Thru-hole |
Solder Type | Water Soluble Solder Paste,Leaded and Lead-Free |
Components | Passives Down to 0201 Size BGA and VFBGA Leadless Chip Carries/CSP Double-Sided SMT Assembly Fine Pitch to 08 Mils BGA Repair and Reball Part Removal and Replacement-Same Day Service |
Bare Board Size | Smallest:0.25x0.25 Inches Largest:20x20 Inches |
File Formats | Bill of Materials Gerber Files Pick-N-Place File(XYRS) |
Type of Service | Turn-Key,Partial Turn-Key or Consignment |
Component Packag PCB Fab+Components Sourcing+PCBA=15 days ing | Cut Tape Tube Reels Loose Parts |
Turn Time | Same Day Service to 15 day service |
Testing | Flying Probe test XRAY Inspection AOI Test |
Electronic components sourcing
We have much parts in stock,which will short the part sourcing time.And if the part that we don't in stock,we also help with sourcing from manufacturers.With more than 10 years EMS service experience,we have established good business relationship with components manufacturers,and distributors.
As we are sourcing these components together,which will benefit to get a good price from manufacturers.
FAQ:
1.Q:How can I know the processing about my PCBA order?
A:Each customer will have a sale to contact with you.MOKO working hours:AM9:00-PM:600(Beijing time) from Monday to
Friday,we will reply your email in two hours in our working time.And you also can contact with our cell phone in urgent.
2.Q:How long will I get your quotation after I send you PCB Gerber file,Bom,Part Date sheet,Pick-N-Place files?
A:The quotation will be sent in less than 2 work days.For some special components you also can recommend suppliers to us.
3.Q:If all PCBAs will be tested before delivery?
A:Yes,we ensure that each piece of PCBA products working fine before shipping,we will test them according to your test
method.What you get from MOKO are high quality boards.
4.Q:What files do you use in bare PCB FABRICATION?
A:Gerber RS-274X,274D,Eagle and AutoCAD's DXF,DWG
5.Q:What format of BOM do you prefer?
A:We prefer in MS-Excel,with Components parts NO,.Manufacturer,Quantity,Value info,other format are also accepted.
6.Q:How many SMT line do you have in your factory?
A:For assembly,we have 8 high-speed SMT lines from Yamaha and Sony,to meet customers' need.
7.Q:What's your products application?
A:Household /Appliance/Medical Products/Industrial products/Consumer electronics.
8.Q:What's your service scope?
A:1.Fast PCB fabrication of samples and mass production;Available on FR4 and Aluminum
2.Electronic components purchasing service
3.PCB Assembly service:Available on SMT,BGA,DIP
4.PCBA Test service
5.Stencil and Enclosure service
9.Q:What do you mean by "One stop service"?
A:Your single point of contact for all of your raw materials, parts, and pcb assembly, also offers:
- Contract Manufacturing
- Engineering Services
- PCB Design & Assembly
- Product Design
- Prototyping
- Cable and Wire Assemblies
- Plastics and Molds
10.Q:How can i make a enquiry?
A:We will quote you within two days if you give us:
1)Gerber file 2)Bom list 3)Test method for PCBA
4)Imformation as quantity ,pcb material,board and copper thickness,surface treating etc.
11.Q:What can i do if i haven't gerber file and bom list?
A:You can send us clear pictures or samples to us.We can make an engineer service for you.
12.Q:What's your delivery time?
A:
Single, Double sided | Four layer | Six Layer | Above eight layer | HDI
| |
Sample lead time (Normal) | 5-6 | 6-7 | 7-8 | 10-12 | 15-20
|
Sample lead time (Fastest) | 48 to72 hours | 5 | 6 | 6-7 | 12 |
Mass production lead time (First batch) | 7-9 | 10-12 | 13-15 | 16 | 20 |
PCB Fab+Components Sourcing+PCBA=15 days
Part of the product
13.Q:Would you please tell me the progress about the pcba manufacture?
A:Step 1:we will manufacture pcb boards out based on the gerber files and pcb imformations provided by the customers.
Step 2:In our pcba department,we will start to assembly these board.We will following these steps:
First step:SMT part
Second step: DIP part
Next step: AOI Test:
Then QC QA IQC IPQC Test:
Last step: packing
Our enterprise Spirit:
"Quality First,Customers First; make you more successful”
About us
MOKO TECHNOLOGY LTD funded in the year 2001, located in Shenzhen. We are a professional EMS/OEM company; provide one-stop contract electronic manufacturing service for PCB&PCBA. From our ISO9001:2000 certified factory ,we turn out up to 10,000 sq^meter of PCBs and 400,000PCBAs monthly. For assembly, utilizing 8 high-speed SMT lines from Yamaha and Sony, to meet customers' need.
Our service including:
1.Fast PCB fabrication of samples and mass production; Available on FR4 and Aluminum.
2.Electronic component purchasing service
3.PCB Assembly service: Available on SMT,BGA,DIP.
4.PCBA Test service
5.Stencil and Enclosure service
Products application:
Household Appliance;
Medical Products;
Automotive Products
Industrial products;
consumer electronics
Welcome to visit us!!!
If any further help, please advise.Thanks for your reading:)
Contact us if you need more details on Led Stip Pcba. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Rigid Pcba、PCB Assembly Service. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : LED Lighting PCBA